|
|
Analysis and verification of air refractive index measurement method for laser interferometry
Pikálek, Tomáš ; Novák,, Jiří (referee) ; Buchta, Zdeněk (advisor)
This thesis deals with a theoretical analysis and experimental verification of a new method for the refractive index of air measurement. This method uses a combination of laser and low-coherence interferometry. The experimental setup is based on the Michelson interferometer equipped with a double-spaced glass cell. The optical path difference between the inner and outer part of the cell that is proportional to air refractivity is estimated using two low-coherence interference signals. These signals are analysed in the frequency domain which results in the dependence of the phase change caused the by air on vacuum wavelength. This dependency is fitted by a theoretical function based on Edlén's equations in order to calculate the phase difference for laser wavelength. This value is then made more accurate utilising two laser interference signals and used for the air refractive index calculation. The new method was experimentally verified and compared to two different techniques. Moreover, the measurement uncertainty was evaluated.
|
|
| |
|
|
Advanced Interferometric Methods of Coordinates Measurement
Holá, Miroslava ; Klapetek,, Petr (referee) ; Mrňa, Libor (referee) ; Lazar, Josef (advisor)
This thesis addresses particular topics in the field of the length metrology for nanometrology. Nanometrology deals with dimensional measurements of micro- and nanostructures with a high spatial resolution. It typically combines a microscope imaging with a precise coordinate measurement, usually capable of nanometre resolution using the state-of-art laser interferometry techniques. The development in this field is driven, among others, by emerging advanced nanotechnologies that demand to push further the capabilities and limits of the interferometric techniques to make the nanometre-level dimensional measurement of nanostructures possible. The principal limitations of current systems are the environmental conditions and especially the fluctuations in the refractive index of air. The theoretical part of this thesis aim at analysis of individual parts of laser interferometer. I oriented myself on the study of their advantages/disadvantages and further also the possibilities of their industrial applications. The second part of the thesis presents my work that focused on the influence of the refractive index of air (RIA) on the measurement uncertainty. I experimentally demonstrated an interferometric system with a self-cancellation RIA fluctuations: a transparent photodetector is used for the measurement of the standing wave along the axis of a passive resonator, where the resonator also serves as a reference for the laser wavelength stabilisation. Another optical arrangement, based on a setup of several Michelson interferometers, represents a combination of an interferometer and a refractometer into a single system. This setup was used to study the behaviour of the ambient airflow with respect to the optical path difference and physical separation of the interferometer’s and refractometer’s path. Based on the experimental results I proposed new arrangements for shape measuring interferometers, which combine length interferometry and a tracking refractometer for the direct compensation of RIA fluctuations with geometrically adjacent optical beams. The results indicate an improvement in RIA fluctuation induced uncertainty by a factor of 100. Third part describes the design and implementation of interferometric systems for specific applications. For the industrial environment I developed a compact interferometric displacement gauge which is designed to allow nanometre level measurement using a simplified interferometer construction. For coordinate measurement of the position of the sample up to six degrees of freedom, I realised a compact modular interferometric system, which represents a unique setup together with a stabilised laser source. To measure the position of the sample in an electron beam writer chamber, I designed and implemented a differential interferometer that works in the near infrared domain and uses a new detection method developed for this system. In the fourth part I describe the realisation of a high-speed interferometer with a differential arrangement, which allows evaluation of high-cycle fatigue in material engineering. This method of studying high-cycle fatigue should be beneficial for both the basic research and the engineering practice.
|
|
|
Atmospheric correction unit for the laser interferometer
Kučera, Stanislav ; Drexler, Petr (referee) ; Szabó, Zoltán (advisor)
This work deals with design, realization and testing the device for suppression the effect of the fluctuation of the atmospheric conditions on the laser interferometer measurement. Parasitic and randomly changes of atmospheric conditions – temperature, pressure, relative humidity and chemical composition of the air changes his refractive index, then wavelength of the laser light in this environment. Physical properties of air are measured by ultraprecision sensors. The actual wavelength is periodically calculated from Edlén formula. The device is processing the quadrature output signals from receiver of the homodyne interferometer include the atmospheric correction in real time. The device is equipped with interface to data acquisition into the personal computer.
|
|
|
Advanced Interferometric Methods of Coordinates Measurement
Holá, Miroslava ; Klapetek,, Petr (referee) ; Mrňa, Libor (referee) ; Lazar, Josef (advisor)
This thesis addresses particular topics in the field of the length metrology for nanometrology. Nanometrology deals with dimensional measurements of micro- and nanostructures with a high spatial resolution. It typically combines a microscope imaging with a precise coordinate measurement, usually capable of nanometre resolution using the state-of-art laser interferometry techniques. The development in this field is driven, among others, by emerging advanced nanotechnologies that demand to push further the capabilities and limits of the interferometric techniques to make the nanometre-level dimensional measurement of nanostructures possible. The principal limitations of current systems are the environmental conditions and especially the fluctuations in the refractive index of air. The theoretical part of this thesis aim at analysis of individual parts of laser interferometer. I oriented myself on the study of their advantages/disadvantages and further also the possibilities of their industrial applications. The second part of the thesis presents my work that focused on the influence of the refractive index of air (RIA) on the measurement uncertainty. I experimentally demonstrated an interferometric system with a self-cancellation RIA fluctuations: a transparent photodetector is used for the measurement of the standing wave along the axis of a passive resonator, where the resonator also serves as a reference for the laser wavelength stabilisation. Another optical arrangement, based on a setup of several Michelson interferometers, represents a combination of an interferometer and a refractometer into a single system. This setup was used to study the behaviour of the ambient airflow with respect to the optical path difference and physical separation of the interferometer’s and refractometer’s path. Based on the experimental results I proposed new arrangements for shape measuring interferometers, which combine length interferometry and a tracking refractometer for the direct compensation of RIA fluctuations with geometrically adjacent optical beams. The results indicate an improvement in RIA fluctuation induced uncertainty by a factor of 100. Third part describes the design and implementation of interferometric systems for specific applications. For the industrial environment I developed a compact interferometric displacement gauge which is designed to allow nanometre level measurement using a simplified interferometer construction. For coordinate measurement of the position of the sample up to six degrees of freedom, I realised a compact modular interferometric system, which represents a unique setup together with a stabilised laser source. To measure the position of the sample in an electron beam writer chamber, I designed and implemented a differential interferometer that works in the near infrared domain and uses a new detection method developed for this system. In the fourth part I describe the realisation of a high-speed interferometer with a differential arrangement, which allows evaluation of high-cycle fatigue in material engineering. This method of studying high-cycle fatigue should be beneficial for both the basic research and the engineering practice.
|
|
|
Atmospheric correction unit for the laser interferometer
Kučera, Stanislav ; Drexler, Petr (referee) ; Szabó, Zoltán (advisor)
This work deals with design, realization and testing the device for suppression the effect of the fluctuation of the atmospheric conditions on the laser interferometer measurement. Parasitic and randomly changes of atmospheric conditions – temperature, pressure, relative humidity and chemical composition of the air changes his refractive index, then wavelength of the laser light in this environment. Physical properties of air are measured by ultraprecision sensors. The actual wavelength is periodically calculated from Edlén formula. The device is processing the quadrature output signals from receiver of the homodyne interferometer include the atmospheric correction in real time. The device is equipped with interface to data acquisition into the personal computer.
|
|
|
Analysis and verification of air refractive index measurement method for laser interferometry
Pikálek, Tomáš ; Novák,, Jiří (referee) ; Buchta, Zdeněk (advisor)
This thesis deals with a theoretical analysis and experimental verification of a new method for the refractive index of air measurement. This method uses a combination of laser and low-coherence interferometry. The experimental setup is based on the Michelson interferometer equipped with a double-spaced glass cell. The optical path difference between the inner and outer part of the cell that is proportional to air refractivity is estimated using two low-coherence interference signals. These signals are analysed in the frequency domain which results in the dependence of the phase change caused the by air on vacuum wavelength. This dependency is fitted by a theoretical function based on Edlén's equations in order to calculate the phase difference for laser wavelength. This value is then made more accurate utilising two laser interference signals and used for the air refractive index calculation. The new method was experimentally verified and compared to two different techniques. Moreover, the measurement uncertainty was evaluated.
|
|
| |
guest ::
